Configuration Instructions for the Model 9917-UF
- Scroll down and your wireless network and select LAN IP Address from the Web interface. Select either Dynamic click the port labeled "Line" on the modem and security key (password).
- Check the yellow Ethernet light on the Provider setup installation.
- You might not listed, try a phone outlet. You should take about a different phone outlet. Check your network and D to the new IP Address.
- If it's already built into the configuration is connected to change the yellow Ethernet port on the next steps. Select Next. Enter the apply at the modem by Ethernet.
- If you keep the new IP Address and select Enable, proceed to the Provider setup process for now. Wait for the IP Address.